1. realvirtual.io Forum
  2. General Questions
  3. Questions
0
Answered

VIETNAM-ALREADY CONNECTED PLC S71200 BUT CANNOT EXCHANGE DATA BETWEEN PLC AND UNITY

Jackson Pham 9 months ago in General Questions • updated by Support 9 months ago • 1

Dear friends.

I already connected PLC S7-1200 and Unity sucessfully.

However, There is no data signal exchanged between PLC (Tia Portal) and Unity.

Please help to find out and solve this problem.

Your prompt support will be highly appreciated.

My test: Turn on the light from Unity via Plc S7-1200.

Answer

Answer
Answered
Support 9 months ago

Hi,

please check if everything is configured well, specially:

- Prevent collissions with real inputs 

- Configure the PLC like described here: https://doc.realvirtual.io/components-and-scripts/interfaces/s7-tcp#configuring-the-plc 

Best regards

Thomas

Answer
Answered
Support 9 months ago

Hi,

please check if everything is configured well, specially:

- Prevent collissions with real inputs 

- Configure the PLC like described here: https://doc.realvirtual.io/components-and-scripts/interfaces/s7-tcp#configuring-the-plc 

Best regards

Thomas

Customer support service by UserEcho