Perfect - and sorry for the missing Byte stuff - we will integrate it into next relase. If you have something to share in public of the things you are doing (a video, linkedin post or something like this) this would be very welcome.

Please try do do this. I am not able to test because currently I have not an ABB Robotstudio with your configuration. Hope it works.

Add Byte to Origin Data Type 

and replace Line 167 following in ABBRobotStudioInterface by this:

if (signal.OriginDataType.ToUpper() != "BYTE")
{
    if (signal.GetType() == typeof(PLCInputInt) || signal.GetType() == typeof(PLCOutputInt))
    {
        if (lastbit)
            posmemory = posmemory + 1;
        bit = 0;
        shm.bit = 0;
        lastbit = false;
        signal.Comment = $"MD{posmemory}";
        accessor.Write(posheader, (byte) 10);
        shm.type = SIGNALTYPE.INT;
        posmemory = posmemory + 4;
    }
}
else
{ if (signal.GetType() == typeof(PLCInputInt) || signal.GetType() == typeof(PLCOutputInt))
    {
        if (lastbit)
            posmemory = posmemory + 1;
        bit = 0;
        shm.bit = 0;
        lastbit = false;
        signal.Comment = $"M{posmemory}";
        accessor.Write(posheader, (byte) 8);
        shm.type = SIGNALTYPE.BYTE;
        posmemory = posmemory + 1;
    }
}

In G4A bytes are also transferred to ints. So if you have on the ABB-Robotstudio SHM Side a Byte it should be on G4A-Side an PLCInputInt or PLCOutputInt.

Thanks, will check this later today.

Can you provide us your ABB RobotStudio project or a simplified example and we will check?

Please try the current G4A professional beta on our download page  https://game4automation.com/download/customers/  we did some changes on the OPCUA side.

Please also check this thread - maybe it is related to the security policy ID. In the new beta there is an additional setting for Security Policy ID - please try to change this to 1 (instead of a 0).

We are not deep experts in ABB  robotsudio and did on our side only a small test project. On the G4A Side all I can say is that you need to enter empty signals so that the structure is without emtpy bits and bytes. Some information about the configuration (Simit is using the same interface) can be found in this video:

https://search.abb.com/library/Download.aspx?DocumentID=9AKK107492A4208&LanguageCode=en&DocumentPartId=&Action=Launch

Hi, not all Interfaces are working on all Platforms. Unity is cross compiling to the destination platform but sometimes we need windows specific DLLs. PLCSim Advanced is not working on Android. But you could connect to it using the S7 interface. More information about platform limitations can be found here:

https://game4automation.com/documentation/current/platforms.html#Known-platform-limitations

Best regards

Thomas

Hard to say what your problem is. Yes for sure, Starter is supporting S7 interface. 

Is it an input or an output what you would like to use. Please make sure, that both are well outside the existing hardware IO adresses, otherwise the hardware status could overwrite the signals from the G4A S7 interface. Do you get any error messages in the console log. Please also check that your PLC is configured like described here:

https://game4automation.com/documentation/current/s7tcpip.html#Configuring-the-PLC