You should divide the Path into two sections. You can then utilize SignalEnded, SignalStart, and possibly LogicSteps to achieve your desired outcome. Does this assist you?

Ja das ist möglich. Für den Build muss per UI oder Datenimport das setzen der Adresse programmiert werden. Dann einfach die Schnittstelle aktivieren während der Simulation und alles sollte funktionieren.

Please check out guided transport function:
https://doc.realvirtual.io/components-and-scripts/motion/guided-transport

IKPath (and all inverse kinematic) is not working in WebGL.

Hello,

I've checked your scene. On part4 is a rotation on the drive which causes the issue (part7 and 8 also have small rotations). Please make sure to set up the kinematic according to our tutorial. Empty gameobjects with the correct position, drive and no rotation. Below this your mesh. Let me know if there are further issue after a changed set up.

Regards Christin

This should be OK, it is important that the pivot point of one axis is always the same as the rotation point of the axis.

It is hard to tell you what the issue is based on the information you provided. Can you send the model which is not working for you (full Unity project) via https://realvirtual.io/send?

Hallo,

das funktioniert mit der ADS NetID und einer Route (die man mit der TwinCAT Config konfiguriert). Im Detail sind wir hier nicht Spezialisten aber die TwinCAT Doku sollte hier Auskunft geben wie das funktioniert. Auf beiden Rechnern muss hierfür ADS installiert sein. Das ist auch als separates Paket (ohne die gesamte virtuelle PLC und Programmierumgebung) auf den Beckhoff Seiten erhältlich. 

Gruß

Thomas

How to read DBs is described here:
https://doc.realvirtual.io/components-and-scripts/interfaces/s7-tcp#reading-and-writing-dbs

Please note, that you can only read included date in the DBs which fit the standard signal types in realvirtual.io which means floats, bools and integers.

Hello,

please check whether the option "Z is an upward vector" is activated or not. It is activated by default and leads to an automatic rotation after the import. Please let me know if the issue still occurs after checking this.

Regards Christin