Hello,

Have you any plans to produce a Force Torque Sensor ?

Ideally it would be as simple as adding it as a component to say the mounting flange of a 6 axis robot to give information about the load.

I looked at the Force Drive but can't get sensible results from it.

Regards

Doug

When creating a test environment in Unity, I encountered an unsolvable error.
After creating a basic scene using the basic documentation, it can be displayed and controlled flawlessly in Unity play mode. Creating a build of the project for UWP results in the following error code (see below).

Tried solutions for basic scene without add-ons except Game4Automation

• Using default settings (Game4Automaltion dropdown menu)
• Removing unsupported elements for UWP (https://doc.realvirtual.io/advanced-topics/supported-platforms ), if available
• Reinstalling and changing the build path of Unity
• Removal of features see https://forum.realvirtual.io/knowledge-bases/2/articles/290-build-error-in-version-202005

Experimental solutions

• Integration of MRTK-ToolKite 3 and configuration of Unity environment for HoloLens2/UWP
• Build of a project without Game4Automation only with MRTK3 (works)
• Removal of unused functions of the Game4Automation software.

Objective for me is to build a S7 TCP/IP Connection with a HoloLens. This works completely in play mode, even in connection with the MRTK 3 toolkit and its functions. For this, the main controller script was modified to have only the interface function. Again, the same error results.

I have made the project available online once with a simple basic scene and with the basic extension for the HoloLens needed for me.

About a feedback\Tips I would be happy.

Failed running C:\Program Files\Unity 2021.3.18f1\Editor\Data\il2cpp/build/deploy/UnityLinker.ex

Build completed with a result of 'Failed' in 20 seconds (19680 ms)
UnityEngine.GUIUtility:ProcessEvent (int,intptr,bool&)

UnityEditor.BuildPlayerWindow+BuildMethodException: 2 errors
at UnityEditor.BuildPlayerWindow+DefaultBuildMethods.BuildPlayer (UnityEditor.BuildPlayerOptions options) [0x002da] in <42a64fd733d9417da1ea3a757ad9a96d>:0
at UnityEditor.BuildPlayerWindow.CallBuildMethods (System.Boolean askForBuildLocation, UnityEditor.BuildOptions defaultBuildOptions) [0x00080] in <42a64fd733d9417da1ea3a757ad9a96d>:0
UnityEngine.GUIUtility:ProcessEvent (int,intptr,bool&)

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Bei der Erstellung einer Testumgebung in Unity ist ein für mich nicht lösbarer Fehler aufgetretten.

Nach dem erstellen einer Grundszene anhand der Grundlagen Dokumentation lässt sich diese einwandfrei im Unity-Playmodus darstellen und kontrollieren. Bei der Erstellung eines Buildes des Projektes für UWP ergibt folgender Fehlercode (siehe unten).

Versuchte Lösungen für Grundszene ohne Add-ons außer Game4Automation

• Verwendung von Standarteinstellungen (Game4Automaltion Dropdown Menü)
•  Entfernen von nicht supporteten Elementen für UWP (https://doc.realvirtual.io/advanced-topics/supported-platforms), soweit vorhanden
• Verwendung letzter Stable Unity Version 2021.3.18f1
• Neuinstallation und Änderung des Buildpath von Unity
• Entfernung der Funktionen siehe https://forum.realvirtual.io/knowledge-bases/2/articles/290-build-error-in-version-202005

Experimentelle Lösungen

• Eindung von MRTK-ToolKite 3 und Konfiguration der Unity Umgebung für HoloLens2/UWP
• Build eines Prokjektes ohne Game4Automation nur mit MRTK3 (funktioniert)
• Entfernung von nicht verwendenten Funktionen der Game4Automation Software

Zielstellung für mich ist es eine S7 TCP/IP Connection mit einer HoloLens herzustellen. Diese funktioniert vollständig im Playmodus, selbst in Verbindung mit dem MRTK 3 Toolkit und dessen Funktionen. Hierzu wurde das Main Controller Script abgeändert, dass nur noch die Interface Funktion vorhanden ist. Auch hier ergibt sich der gleiche Fehler.

Ich habe das Projekt online zur Verfügung gestellt einmal mit einer einfachen Grundszene und mit der für mich benötigten Grunderweiterung für die HoloLens.

Über einen Rückmeldung\Tipps würde ich mich freuen.

Failed running C:\Program Files\Unity 2021.3.18f1\Editor\Data\il2cpp/build/deploy/UnityLinker.ex

Build completed with a result of 'Failed' in 20 seconds (19680 ms)
UnityEngine.GUIUtility:ProcessEvent (int,intptr,bool&)

UnityEditor.BuildPlayerWindow+BuildMethodException: 2 errors
at UnityEditor.BuildPlayerWindow+DefaultBuildMethods.BuildPlayer (UnityEditor.BuildPlayerOptions options) [0x002da] in <42a64fd733d9417da1ea3a757ad9a96d>:0
at UnityEditor.BuildPlayerWindow.CallBuildMethods (System.Boolean askForBuildLocation, UnityEditor.BuildOptions defaultBuildOptions) [0x00080] in <42a64fd733d9417da1ea3a757ad9a96d>:0
UnityEngine.GUIUtility:ProcessEvent (int,intptr,bool&)

On the OPCUA server, I logged in a user.

I set up the "OPCUA_Interface" component in Unity.

At that time, the "user name" and "password" set on the server were set to "OPCUA_Interface".

In this state, click the "Import nodes" button of "OPCUA_Interface".

Then the following error is displayed in the console.

「OPCUA Interface - Error in activating session [BadUnknownResponse]UnityEngine.Debug:LogError (object)」

Please tell me how to improve.

Hello,

I am trying to connect a CS9 controller from Stäubli, but the OPC UA server is published on the following address: 

opc.tcp://172.XXX.XXX.XXX:4880/Staubli

This last "/Staubli" data can not be written in the Port field or any other in OPC UA script, so the connection can not be stablished... It is not possible to modify the address in the controller, so I would like to know how can I define this address to properly connnect my server.

Unity 2021.3.15 , latest version of Starter. Imported OK and works. 

 Then imported Parts4cad - got multiple compile errors

Assets\game4automation\parts4cad\private\Editor\ColladaImportPostprocess.cs(10,39): error CS0433: The type 'Parts4CadSettings' exists in both 'game4automation.parts4cad, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null' and 'parts4cad, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null'

Also compiler error due to multiple copies of ionic.zip

Any help appreciated. Thanks!

Using professional version.

I followed the tutorial in this video,  "Tutorial - realvirtual.io - Inverse robot kinematic with Unity",  because I could see the robot jump back at each new target in a path.

Having finished the tutorial myself in Unity, I can see that the jump is real especially when the speed override is very slow.

Why does it jump and how can this be prevented. ? it is causing us a lot of grief.

Even in Edit mode when adding a new target to a path, the robot jumps back from the target at the start.

I would expect the target and TCP to both be in the same place and that would solve the problem, I find it very dissapointing that such a discrepancy exists in what is made out to be a professional product.

Thank you.

.

Using professional version.

When driving a robot arm around in Axis mode using a joystick, dirve CurrentPosition reports the correct angles.

However when in IK mode, the returned values change sign at the 180 position.

How can I get proper angle values in IK mode ?

I am wanting to connect to a AB Control Logix. I have IP, PLC type and a CSV file creating one test variable (float). When I test communication. It has a error. [EthernetIP - Error in connecting to PLC, please check your connection settings!] The only variable is the PATH. PATH has no explanation in documentation. I am used to CIP path, but that format doesnt seem to work. In my test rack I have a L83 processor, with built in ethernet, in slot 0. IP I can ping and connect with software. Just trying to set up a use case demo. I have a stand alone ethernet card I could use but dont think thats the issue.
I've tried 1,0   0,0  1,1  same error.

Hallo Thomas Ich muss mein Rechner neu mit Windows 11 Prof verwenden. Nach der Installation 3 D Unity und Game 4 Automation Boot Fehler mein System startet nicht mehr. Auch ein Upgrade von Windows 10 auf Windows 11 verursacht diesen Fehler. Nach Reparatur mit Bit Logger Schlüssel Startvorgang wieder Okay aber alle Unity und Game 4 Automation wurden gelöscht.

Ist hier etwas bekannt? Gruss Bruno

I found it useful to change DriveToTarget to this;

public bool DriveToTarget(IKTarget target)

it returns true if the target was reachable otherwise false